Nace Boeken
1-20 van 20,000

Degrees of disavantage

Linda Evans

Looking at the more able: where do you start?

George Ilsley

Cathodic protection survey procedures

W. Brian Holtsbaum

An introduction to asset corrosion management in the upstream offshore industry

Ali Morshed

Guide to corrosion management of reinforced concrete structures

Ali Akbar Sohanghpurwala

Guide to improving pipeline safety by corrosion management

Drew Hevle

Guide to corrosion management of reinforced concrete structures

Ali Akbar Sohanghpurwala

The corrosion of copper and its alloys

Francis Roger Engineer

The corrosion of copper and its alloys

Francis Roger Engineer.

The protective coating user's handbook

Louis D. Vincent

Cathodic protection survey procedures

W. Brian Holtsbaum

Petroleum and natural gas industries

NACE International

A Selection of Materials for Seawater Cooling Systems

Roger Francis

Corrosion Basics

Pierre R. Roberge

Oilfield water technology

Davies Michael Dr

Corrosion 2005

Corrosion 2005 (2005 Houston Tex.)

Subject index.

Standard recommended practice

Standard recommended practice

The Protective Coating User¿s Handbook

Louis D. Ph.D. Vincent

Standard recommended practice

Standard recommended practice

Pitting and crevice corrosion

Z. Szklarska-Smialowska

Standard recommended practice

Standard test method

Corrosion Testing Made Easy

Pierre R. Roberge

NACE international book of standards

Standard recommended practice

Standard recommended practice

Application of a coating system to interior surfaces of covered steel hopper rail cars in plastic food and chemical service.

Fusion-Bonded Epoxy (FBE)

J. Alan Kehr

NACE International Standard

Fabrication details surface finish requirements and proper design considerations for tanks and vessels to be lined for immersion service.

Laboratory test procedures for evaluation of SOHIC resistance of plate steels used in wet h2s service.

Corrosion control for enhanced reliability and safety

Northern Area Eastern Conference 2003 Canadian National Capital Section Ottawa Ontario)

Avoiding caustic stress corrosion cracking of carbon steel refinery equipment and piping.

Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking.

NACE international book of standards

Corrosion control of steel fixed offshore structures associated with petroleum production.

Application of a coating system to exterior surfaces of steel rail cars.

Installation of thin metallic lining in air pollution control and other process equipment.

Joint surface preparation standard

Guide to the Use of Materials in Waters

Michael Davies

Field-applied heat-shrinkable sleeves for pipelines

Metals for sulfide stress cracking and stress corrosion cracking resistance in sour oilfield environments.

Field Guide for Investigating Internal Corrosion of Pipelines

Richard Eckert

Materials resistant to sulfide stress cracking in corosive petroleum refining environments.

Joint surface preparation standard

Application of a coating system to interior surfaces of new and used rail tank cars.

Worksheet for the selection of oilfield nonmetallic seal systems.

Guidelines for qualifying personnel as abrasive blaster and coating and lining applicators in the rail industries.

NACE International Standard

Pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems.

NACE book of standards

Measurement of protective coating electrical conductance on underground pipelines.

Coatings and linings over concrete fro chemical immersion and containment service.

Field-applied coal tar enamel pipe coating systems

On-line monitoring of cooling waters.

NACE book of standards

Pipeline external corrosion direct assessment methodology.